OEM Centrifugal Pulp Pumps & Centrifugal Pumps for Pulp and Paper Mills
HUATAO OEM Kinds Of Centrifugal Processing Pulp Pump for Paper Machine to deliver the pulp and water.
And the Pulp Pumps as the key equipment during the pulp stock preparation.
SGZ SK Centrifugal Pump
SGZ SK Centrifugal Pump high-efficiency non-clogging non-leakage pulp pump is a new generation of pulp pump products.
It has obvious advantages such as high efficiency, good anti-clogging performance, no leakage during operation, and convenient installation and maintenance. It is widely used in the conveying of pulp media in paper and pulp enterprises.
Centrifugal Pump Structural features:
1. The pump has a rear door structure, and it is not necessary to disassemble the pipeline during maintenance.
2. The pressure design of the inlet and outlet flanges of the pump is 1.6MPa.
3. The impeller adopts a three-blade (or six-blade), open impeller, high efficiency and no need for axial thrust compensation, easy maintenance and low chance of blockage. The impeller adopts lost wax precision casting and is checked for dynamic balance.
4. The pump shaft is supported by a combination of oil-lubricated, heavy-duty, abrasion-resistant, imported cylindrical roller bearings and radial thrust ball bearings (angular contact ball bearings). Cylindrical roller bearings are mounted on the pump end and radial thrust ball bearings are mounted face to face on the rotating end
5. Shaft seals mainly include a pumping ring plus single-end mechanical seal, packing seal, single-end mechanical seal, tandem mechanical seal, double-end mechanical seal, combination seal of pumping ring and single-end mechanical seal, and dynamic seal. , the user can choose according to the requirements and actual working conditions
6. There are four kinds of materials: cast iron, cast steel, ordinary stainless steel, and duplex stainless steel.
Low Pulse Pulp Pump
SJ-type sizing pump, also known as a low-pulse pump, is designed for the disadvantages of large flow and low-lift mixed-flow pumps widely used in general papermaking enterprises, such as unstable pulp and inconvenient disassembly and assembly. It is an ideal replacement product, with high efficiency, stable pulp, long service life, and easy maintenance (the bearing is balanced at both ends of the pump body). (The pump casing is opened in the middle, and maintenance can be done after opening the cover.) It is suitable for matching the pulp supply system of medium and high-speed paper machines. The operating temperature is below 80 °C and the concentration is below 1%.
The pump looks from the coupling to the pump, the pump rotates counterclockwise, the slurry inlet of the pump is on the right, and the slurry outlet is on the left. If you need to change the position of the slurry inlet and outlet, you need to submit it in advance and confirm with the drawing.
| Product Name |
Pulp Pump |
| Pressure |
≤1.6MPa |
| Material |
Stainless Steel, Cast Iron |
| Speed |
1450-2900rpm |
| Medium |
Pulp, Syrup Starch, Chemical Slurry, Industrial Wastewater |
| Material of wetted parts |
High Chromium Alloy |
| Temperature |
-20ºC-150ºC |
| Application |
Papermaking, Electricity, Mining, Coal, Metallurgy, Environmental Protection, Etc. |
| OEM Support |
Yes |
| Voltage |
220V/380V/400V |
Double Flow Centrifugal Pump
S-type and SH-type centrifugal pumps are single-stage double-suction, horizontal split centrifugal pumps, which are used to transport clean water and liquids with similar physical and chemical properties to water. The maximum temperature of the liquid does not exceed 80 ºC, which is suitable for paper mills, mines, cities, power station water supply, and drainage, farmland irrigation and drainage, and various water conservancy projects.
Model S centrifugal pumps look towards the pump from the coupling and the pump rotates clockwise. The water inlet of the pump is on the right and the water outlet is on the left. If you need to change the position of the import and export, you need to explain it before production.
SH type centrifugal pump looks at the pump from the coupling, and the water pump rotates counterclockwise. The water inlet of the pump is on the left and the water outlet is on the right. If you need to change the position of the import and export, you need to explain it before production.
The bearings of the centrifugal pump are located at both ends of the pump body, and the force is balanced during operation and has a long service life. The pump body is open in the middle, and it can be repaired by opening the cover, which is very convenient.
Slurry Pump, Middle Consistency Slurry Pump
Double-channel non-clogging pulp pump is a new type of energy-saving pulp pump. After practical use, it has the advantages of high efficiency, no leakage or less leakage, good anti-clogging performance, stable operation, high reliability, compact structure, and long service life. This series of pumps has been innovated and improved according to the characteristics of papermaking and pulping processes and has achieved the best application of fluid engineering and fluid mechanics.
The semi-open or fully open impeller is adopted, the front clearance between the wear plate and the impeller is adjustable, the shaft seal is mainly mechanical seal, and high-precision bearings (D-grade accuracy), and high-quality shaft materials are selected.
It can be widely used in light industry, papermaking and other industries where the temperature is lower than 110ºC and the concentration is lower than 6%. It can also be used in industrial and urban water supply, drainage, and other occasions. Special specifications can be designed individually.
1. Fully open, three-blade impeller, large flow channel, strong performance without clogging.
2. Wear-resistant linings at the suction and discharge ends of the impeller are used to protect the eddy current casing.
3. The new protective cover design makes it easier to disassemble.
4. Brand new chassis design, stronger and more convenient for coupling adjustment.
Huatao Group, founded in 2008, is a specialist supplier of paper and pulp mill machinery with a long history of exporting paper making machines, paper pulp machines, corrugated cardboard production line, and paper machine clothing (PMC), as well as spare parts for paper and board machines. Since the day of our foundation, we have made a firm commitment to building "Huatao" as a reliable international brand standing out from the crowd. The long-term partnership with a number of renowned paper machine manufacturers and paper machine clothing factories is focused on realizing this commitment, from professional design and on-time delivery of high-quality paper & board machines to a superior customer service attitude.
Over the past years, Huatao has accumulated extensive experience in servicing our global customers within the pulp and paper industry. That means we understand the industry and have the ability to provide each of our customers with appropriate paper machines or paper machine fabrics that are precisely oriented to their respective production needs. Huatao has so far served over 1000 companies with products exported to more than 100 countries and regions in the world.
Based on the belief that quality is the key to our longevity, our entire team strives to earn your ongoing trust and constant support as your reliable partner.
){kind=link}