Nash Pump Double Flow Centrifugal Pump Centrifugal Low Pulse Pulp Pump For Paper Industry
Single-stage centrifugal pump with full-open impeller design.
Suitable for conveying slurry or clean water with a pulp concentration of 0-6%.
The scope has pump, base frame for placing pump, and standard motor, with screw coupling, coupling protection cover, and anchor bolts.
SGZ SK Centrifugal Pump
SGZ SK Centrifugal Pump
SGZ SK Centrifugal Pump high-efficiency non-clogging non-leakage pulp pump is a new generation of pulp pump products.
It has obvious advantages such as high efficiency, good anti-clogging performance, no leakage during operation, and convenient installation and maintenance. It is widely used in the conveying of pulp media in paper and pulp enterprises.
Centrifugal Pump Structural features:
1. The pump has a rear door structure, and it is not necessary to disassemble the pipeline during maintenance.
2. The pressure design of the inlet and outlet flanges of the pump is 1.6MPa.
3. The impeller adopts a three-blade (or six-blade), open impeller, high efficiency and no need for axial thrust compensation, easy maintenance and low chance of blockage. The impeller adopts lost wax precision casting and is checked for dynamic balance.
4. The pump shaft is supported by a combination of oil-lubricated, heavy-duty, abrasion-resistant, imported cylindrical roller bearings and radial thrust ball bearings (angular contact ball bearings). Cylindrical roller bearings are mounted on the pump end and radial thrust ball bearings are mounted face to face on the rotating end
5. Shaft seals mainly include a pumping ring plus single-end mechanical seal, packing seal, single-end mechanical seal, tandem mechanical seal, double-end mechanical seal, combination seal of pumping ring and single-end mechanical seal, and dynamic seal. , the user can choose according to the requirements and actual working conditions
6. There are four kinds of materials: cast iron, cast steel, ordinary stainless steel, and duplex stainless steel.
Low Pulse Pulp Pump
Low Pulse Pulp Pump
SJ-type sizing pump, also known as a low-pulse pump, is designed for the disadvantages of large flow and low-lift mixed-flow pumps widely used in general papermaking enterprises, such as unstable pulp and inconvenient disassembly and assembly. It is an ideal replacement product, with high efficiency, stable pulp, long service life, and easy maintenance (the bearing is balanced at both ends of the pump body). (The pump casing is opened in the middle, and maintenance can be done after opening the cover.) It is suitable for matching the pulp supply system of medium and high-speed paper machines. The operating temperature is below 80 °C and the concentration is below 1%.
The pump looks from the coupling to the pump, the pump rotates counterclockwise, the slurry inlet of the pump is on the right, and the slurry outlet is on the left. If you need to change the position of the slurry inlet and outlet, you need to submit it in advance and confirm with the drawing.
Watering Ring Vacuum Pump
Watering Ring Vacuum Pump
The water ring vacuum pump (referred to as a water ring pump) is a rough vacuum pump, the ultimate vacuum it can obtain is 2000~4000Pa, and the vacuum degree of the unit formed with the vacuum pump can reach 1~600Pa. The water ring pump can also be used as a compressor, which is called a water ring compressor, which is a low-pressure compressor with a pressure range of 1~2×10^5 Pa gauge pressure.
The water ring vacuum pump is equipped with an eccentric rotor with fixed blades, which throws water (liquid) to the stator wall, and the water (liquid) forms a liquid ring concentric with the stator, and the liquid ring and the rotor blades together form a variable volume. The positive displacement vacuum pump. In many processes of industrial production, such as vacuum filtration, vacuum water diversion, vacuum feeding, vacuum evaporation, vacuum concentration, vacuum resuspension, and vacuum degassing, water ring pumps are widely used. Mainly used in a coal mine (gas pumping), chemical, pharmaceutical, mining, paper, food, beer, building materials, plastics, metallurgy, electrical appliances, and other industries.
Double Flow Centrifugal Pump
Double Flow Centrifugal Pump
S-type and SH-type centrifugal pumps are single-stage double-suction, horizontal split centrifugal pumps, which are used to transport clean water and liquids with similar physical and chemical properties to water. The maximum temperature of the liquid does not exceed 80 ºC, which is suitable for paper mills, mines, cities, power station water supply, and drainage, farmland irrigation and drainage, and various water conservancy projects.
Model S centrifugal pumps look towards the pump from the coupling and the pump rotates clockwise. The water inlet of the pump is on the right and the water outlet is on the left. If you need to change the position of the import and export, you need to explain it before production.
SH type centrifugal pump looks at the pump from the coupling, and the water pump rotates counterclockwise. The water inlet of the pump is on the left and the water outlet is on the right. If you need to change the position of the import and export, you need to explain it before production.
The bearings of the centrifugal pump are located at both ends of the pump body, and the force is balanced during operation and has a long service life. The pump body is open in the middle, and it can be repaired by opening the cover, which is very convenient.
Slurry Pump, Middle Consistency Slurry Pump
Slurry Pump, Middle Consistency Slurry Pump
Double-channel non-clogging pulp pump is a new type of energy-saving pulp pump. After practical use, it has the advantages of high efficiency, no leakage or less leakage, good anti-clogging performance, stable operation, high reliability, compact structure, and long service life. This series of pumps has been innovated and improved according to the characteristics of papermaking and pulping processes and has achieved the best application of fluid engineering and fluid mechanics.
The semi-open or fully open impeller is adopted, the front clearance between the wear plate and the impeller is adjustable, the shaft seal is mainly mechanical seal, and high-precision bearings (D-grade accuracy), and high-quality shaft materials are selected.
It can be widely used in light industry, papermaking and other industries where the temperature is lower than 110ºC and the concentration is lower than 6%. It can also be used in industrial and urban water supply, drainage, and other occasions. Special specifications can be designed individually.
1. Fully open, three-blade impeller, large flow channel, strong performance without clogging.
2. Wear-resistant linings at the suction and discharge ends of the impeller are used to protect the eddy current casing.
3. The new protective cover design makes it easier to disassemble.
4. Brand new chassis design, stronger and more convenient for coupling adjustment.
Audited Supplier 
){kind=link}
){kind=link}