Product Description This type of pump is a single-stage double- -suction centrifugalpumps, for the transport of water and physical and chemicalproperties similar to liquid water. The maximum liquid temperatureshould not exceed 80ºC, It is suitable for factories, mines, cities, power plants of the water supply and drainage, farmland drainageirrigation and various water conservancy projects. This type of pump bearings are at both ends in the pump body, workforce balanced.The pump is in the open, it is very convenient that opening can bemaintained.
The pump from the coupling to the pump, the water pump tor clockwisereverse rotation, the inlet of the pump on the right side, the outlet onthe left. If you want to change the location of imports and exportshave to come up when you order it.
Drawing
1. Coupling 2. Pump Body 3. Bearing body 4. Bearing cover 5. Shaft sleeve nut 6. Packing shaft sleeve 7. Packing block set 8. Pump Body 9. Impeller 10. Sealing ring 11. Packing ring 12. Packing 13. Packing gland 14. Bearing nut 15. Bearing body end cover
Product
Single-stage single-suction clean water, hot water pump
Product This series of single-stage single-suction axial suction centrifugal pumps, applicable to industrial and urban water supply, water drainage can also be used for agricultural irrigation and drainage. Be used for conveying water. For transporting clean water, the water temperature is not higher than 80 ºC For transporting the hot water, the water temperature of 150 ºC or less.
Performance range Speed: 2900 r/min and 1450 r/min lImport diameter: 50 -200mm Traffic/Flow/Capacity: 6.3- 400 m3/h Head: 5-125m