Aluminum Alloy Air Operated Pneumatic Diaphragm Pump Various Sizes

Product Description

Air Operated Double Diaphragm Pump

 

Product Description

Pneumatic diaphragm pump is a new type of conveying machinery that uses compressed air as the power source, and can pump all kinds of corrosive liquids. Its performance parameters are similar to those of imported pumps. It is placed in various special occasions and used to pump various media that cannot be pumped by conventional pumps. It has achieved satisfactory results. It can also be divided into cast iron, stainless steel, aluminum alloy, etc. according to user requirements. Fluoroplastics, etc.
 

Features

1.No need for irrigation and diversion, it can work submerged in the medium, the suction lift is up to 5m, the lift is up to 50m, and the outlet pressure is ≥6bar.

2.The flow is spacious and the passing performance is good, the maximum particle diameter allowed to pass is 10mm. When pumping mud and impurities, there is little wear on the pump.

3.Head and flow can be adjusted steplessly through the opening of the air valve (the air pressure can be adjusted between 1-7 bar).

4.The pump has no rotating parts and no shaft seal. The diaphragm completely separates the pumped medium from the moving parts of the pump and the workpiece medium, and the transported medium will not leak out.

5.Simple structure, less wearing parts, the pump is simple in structure, easy to install and maintain.

6.Can transport viscous liquid (viscosity below 10,000 centipoise).

7.The pump does not need to be lubricated with oil, even if it is idling. It has no effect on the pump, which is the biggest feature of the pump.

8.Easy to use, reliable work, just open and close the gas valve to start and stop.

 

Application:

1.Peanut butter, pickles, mashed potatoes, red sausage, chocolate, hops, syrup.
2.Various paints, pigments, glues, adhesives.
3.All kinds of tiles, porcelain, brickware and ceramic glaze paste.
4.Various abrasives, corrosive agents, cleaning grease.
5.Various highly toxic, flammable and volatile liquids.
6.All kinds of sewage, cement grouting and mortar.
7.Various strong acids, strong alkalis, strong corrosive liquids.
8.Various viscous pastes, emulsions, various ointments and cosmetics.
9.Pre-stage pressure supply device for various solid-liquid separation equipment.