RC81 Technical Parameters: 1. Working range: 1~16% concentration (according to measuring components) 2. Sensitivity: better than ±0.005% 3. Measurement accuracy: close to sensitivity under stable conditions 4. Damping time: 1~100S 5. Maximum working pressure: 1MPa, 80°C shell: cast aluminum 6. Contact medium part: stainless steel 7. Motor: 3-phase 380VAC, 370W, IP54 8. Analog signal output: 4~20mA, load 0~750
Main Features: 1. Liquid crystal display, which can realize multi-point, parabolic calibration and easy to operate calibration; 2. Signal damping and filtering are very low, signal to noise ratio is high, and has high precision; 3. Not affected by pulp, fiber type, freeness, Kappa number, flow rate, pressure, etc.; 4. It is little affected by pH and temperature, and the temperature can be compensated; 5. Unaffected by pressure, air bubbles, and electrical conductivity; 6. Fast response, short reaction time and control dead time, and good controllability; 7. It can be installed on horizontal, vertical, or inclined pipes. The sensor shaft should be horizontal and the motor should be under the sensor.
Consistency Transmitter Type 2 : External Rotary Electronic Online Pulp Consistency Transmitter External rotary pulp concentration Transmitter is mainly composed of a controller, external spin concentration sensor, measuring bucket, diluted water valve, four parts
Specification: Measuring range:1%---6% Working environment: up to 60 application : Long fiber pulp components: Stainless steel 304 principle: Pulp shear force power:220v accuracy :0.02% Sensor power:380v sensitivity :up to 0.01% Analog signals :4-20mA Repeat accuracy :0.2% Digital signal : RS422 cycle :1s-20s ratio :0----100
){kind=link}