Inline Consistency Measurement for Stock Preparation

• Warranty: 1 Year
• Product Type: Waste Paper Pulp
• Usage: Packing Paper Machine
• Certification: CE, RoHS, ISO, SGS
• Condition: New
• After-sales Service: 1 Year
• Model NO.: HT179
• Transport Package: Wooden Box
• Specification: As requesy
• Trademark: HUATAO
• Origin: China
• HS Code: 84399100
• Production Capacity: 50PCS/1month

Product Description

 Blade Consistency Transmitter

 

Product Description

Tybe1:
RC81 Technical Parameters:
1. Working range: 1~16% concentration (according to measuring components)
2. Sensitivity: better than ±0.005%
3. Measurement accuracy: close to sensitivity under stable conditions
4. Damping time: 1~100S
5. Maximum working pressure: 1MPa, 80°C shell: cast aluminum
6. Contact medium part: stainless steel
7. Motor: 3-phase 380VAC, 370W, IP54
8. Analog signal output: 4~20mA, load 0~750

Type 2 :
External Rotary Electronic Online Pulp Consistency Transmitter 
 External rotary pulp concentration Transmitter is mainly composed of controller, external spin concentration sensor, 
measuring bucket, diluted water valve, four parts

Product Parameters

Specification:
Measuring range:1%---6%
Working environment: up to 60
application :
Long fiber pulp components: Stainless steel 304
principle: Pulp shear force power:220v
accuracy:0.02%
Sensor power:380v
sensitivity: up to 0.01%
Analog signals:4-20mA
Repeat accuracy: 0.2%
Digital signal: RS422
cycle:1s-20s
ratio: 0----100

Our Advantages

Main Features:
1. Liquid crystal display, which can realize multi-point, parabolic calibration, and easy to operate calibration;
2. Signal damping and filtering are very low, signal to noise ratio is high, and has high precision;
3. Not affected by pulp, fiber type, freeness, Kappa number, flow rate, pressure, etc.;
4. It is little affected by pH and temperature, and the temperature can be compensated;
5. Unaffected by pressure, air bubbles and electrical conductivity;
6. Fast response, short reaction time and control dead time, and good controllability;
7. It can be installed on horizontal, vertical or inclined pipes. The sensor shaft should be horizontal and the motor should be under the sensor.