| Customization: | Available |
|---|---|
| Type: | Toothed Belt |
| Material: | Rubber |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Arc Tooth Timing Belt is a transmission belt used to transmit power and motion. It has a special tooth profile consisting of a series of arc-shaped teeth that match the teeth of a transmission, usually a gear.
Compared with the traditional straight tooth timing belt, the main advantage of the arc tooth timing belt is that it reduces the impact and noise between teeth and provides smoother transmission. This is because the contact between the teeth of the arc tooth timing belt and the gear teeth is gradually established and released, rather than sudden contact and separation.
Advantage:
1. High transmission stability: The arc tooth timing belt has a reasonable tooth groove design, which makes the synchronous pulley and the belt body more closely meshed, which can reduce the tooth skipping phenomenon in the transmission and the energy loss during the transmission process. This ensures the stability of the transmission.
2. Low noise: The tooth design of the arc tooth timing belt reduces the impact and vibration during the transmission process, thereby reducing the generation of noise and making the transmission more stable. This also enables it to withstand greater loads.
3. Long service life: The arc tooth timing belt is made of high-strength polyurethane or rubber material, which has good wear resistance and corrosion resistance and can maintain a long service life.
Application:
Food, automobile, textile, pharmaceutical, printing, paper and other industries.
| Tooth Profile | Type | Pitch(mm) | Tooth Height(mm) | Belt Thickness(mm) |
HTD |
2M | 2.00 | 0.75 | 1.36 |
| 3M | 3.00 | 1.17 | 2.4 | |
| 5M | 5.00 | 2.06 | 3.8 | |
| 8M | 8.00 | 3.36 | 6.00 | |
| 14M | 14.00 | 6.02 | 10.00 | |
| 20M | 20.00 | 8.4 | 13.20 | |
STPD/STS |
S2M | 2.00 | 0.76 | 1.36 |
| S3M | 3.00 | 1.14 | 1.9 | |
| S4.5M | 4.50 | 1.71 | 2.81 | |
| S5M | 5.00 | 1.91 | 3.4 | |
| S8M | 8.00 | 3.05 | 5.3 | |
| S14M | 14.00 | 5.3 | 10.2 | |
RPP/HPPD |
P2M | 2.00 | 0.76 | 1.36 |
| P3M | 3.00 | 1.15 | 1.9 | |
| P5M | 5.00 | 1.95 | 3.5 | |
| P8M | 8.00 | 3.2 | 5.5 | |
| P14M | 14.00 | 6.00 | 10 |
){kind=link}